Furniture getting tarnished and greyed up can be heartbreaking. So, if you have old furniture that you want to restore and use in your new house or if you want to add more life to your home, then I suggest that you learn how to restain wood furniture. In this article, I will teach you the ropes on restaining wood furniture and give you additional tips to make sure that the table pulls through the test of time.
How to Restain Wood Furniture
Restaining wood furniture can be easy for some. But, for most of us who do not know how to do it, it can be taxing. But, if you are eager enough, they can learn it in no time.
Materials and Tools
Before you can learn how to restain wood furniture, you will first need to gather all the tools and materials required.
- Safety gear like goggles, dust mask, and gloves
- Sandpaper
- Sanding block
- Palm sander
- Pads
- Scraper tool
- Clearcoat
- Staining pads
- Oil-based stain
- Mineral spirits
- Tack cloth
- Disposable cloths
- Paint stripper
How to Restain Wood Furniture
Now that you have all of the materials and tools needed, you can now follow these instructions on how to restain wood furniture.
Wash or Clean
The first step is to wash or clean the furniture that you want to restain. You have to make sure that you have detached all the hinges and everything that may stand in the way of you refurbishing or restaining the wooden furniture.
You can remove the molds, wash the furniture, wipe it down, and then let it dry. Once it’s dry, you can then take it inside or get on with the restaining.
The Stripper
Next, grab the paint stripper and then spray it onto the surface of your furniture. An aerosol paint stripper will work for smaller furniture. However, if you are working with a larger whole, you may need something more appropriate for the size.
Spray it all over the furniture and then leave it for five to ten minutes. You will then see the finish start to lift off of the wood.
Removing the Old Stain
Grab the scraper and use it to remove the old wood stain from the furniture and then wipe the blade with a disposable washcloth between every scrape. You may have to go over and spray it with the stripper and then scrape it again for you to remove the majority of the strain.
Clean Again
When learning how to restain wood furniture, you must know that it involves a lot of cleaning. As you can see, this is the second time I am telling you to clean the furniture.
But, this time, you will be dealing with the mineral spirit. All you have to do is to wipe them off using the cloth that you have.
Sand It Smooth
Next is sanding the furniture up to remove any residue of the old wood stain. You can make use of palm sander with medium-grit sandpaper, about 150 grit. When you see the bare wood, you can then switch to fine sandpaper with 200 grit until the entire furniture is uniformly naked.
Remove the Residue
Grab the tack cloth and wipe down the entire piece to remove all the sanding residue and get it ready to rest.
Apply the Stain
Next, you may now apply the brand new furniture wood stain. Make sure that when you use it, you only do each stroke in one direction. Never go opposite ways because this will make the paint look messy.
Allow it to dry, and then remove the excess stain by using a clean wiping cloth. Wipe it lightly with the grain to avoid any streaking.
Next, you can keep applying multiple coats until the color gets vivid and bright enough, depending on your preference.
Clear Coat
Finally, you can apply the clear coat by spraying it all over the furniture’s surface and then making sure that it is evenly coated. After that, you can then let it sit and dry. Know more about wood furniture care.
Conclusion
Learning how to restain wood furniture is a no brainer for some people, but it won’t be easy for most of us who still do not know how to do it. That is why, in this article, I discussed the ropes on how to restain wood furniture. All you have to do now is follow that instruction and find the best products that will help with your restaining the furniture.