How To Fix A Bar Clamp With Effective Ways

Bar clamps are our reliable tool to use when it comes to holding heavy and large pieces. But if you often see marrings on your workpiece, that isn’t normal! This is a call for some adjustment or fixing with your bar clamp. You will learn how to fix bar clamp if you will let yourself be absorbed in.
What’s the Use of Having Bar Clamps?
Wrapping around a heavy and large object for a steady hold is easy with the help of bar clamps. If you have these, you are sure to get even cuts and measurements with your workpiece. It is actually multi-purpose as you can also use this with plastics, woods, and metals. As humans, holding pieces could be tiring and can cause hand fatigue. Sometimes, as we get so tired, we lose our grip and damage our piece. But not with bar clamps because they are stable and reliable as long as you set them properly. It prevents slips, scratches, and abrasions in our workpiece. This is why, if we notice a change in its performance, we should know how to fix bar clamp. By reading below you learn some tips on how to fix it.
How to Fix Bar Clamps:
Different Types of Bar Clamps
Before you start learning about how to fix bar clamp, you must know that there are different types of bar clamps. As to what we know, they hold and secure but each is made for a more specific purpose. Here are the different types of bar clamps:
a. Quick-release Bar Clamp
If you need an easy open and close hold, this is the best type that you can use. Bear in mind that in some places, they call it a trigger clamp because of its ability to clamp and unclamp quickly.
b. Sash Clamp
This is the commonly used clamp of the carpenters and woodworkers. You will not have a hard time using it because you can adjust both jaws.
c. Pipe Clamp
It has a circular bar that looks like a pipe. You can use this if you need to join, fasten, or glue your workpiece together.
d. T-Bar Clamp
This is similar to a sash clamp. Their difference is the, of course, shape. You can use this T-shape if you need more support because it is ideal for larger pieces. Also, you may find this pricey because this is often used for heavy and large delicate pieces.
Use Laundry Wire
How to fix bar clamp that keeps on slipping? This is the common problem of every bar clamp. You might find this funny but putting a piece of wire between the sliding jaw and bar will prevent the clamp from slipping. This solution isn’t costly. In fact, you can see these wires outside of your house. Like where you hang your clothes to dry under the scorching heat of the sun. All you need to do is cut from your excess laundry wire which is about 4 to 5-inches. Then like we’ve mentioned earlier, insert in between the sliding jaw and the bar. And voila! Your problem is solved.
Roughen the Back!
Another method that you can try on how to fix bar clamp is linked to the use of a hacksaw. With your hacksaw, run the blade in a slanted position to make small cuts at the back of the bar clamp. Remember, for this to work you must maintain a slanted position to make perfect roughs. With these cuts, the jaws of your bar clamp will not slide loose. If you don’t have a hacksaw at home, you can use a handsaw. Do the same process and you’ll get a promising result. Easy right? This won’t take you 10 minutes to be done. You don’t need to buy a need one. Just do this trick and you can save money!
Conclusion
Carpentry, wood, or metalworking is disastrous without the help of a bar clamp. Yes, it is possible for to us make, but it comes with a price of hand fatigue and misalignment. Of course, none of us would want to risk getting these issues. That is why we seek help from bar clamps! Bar clamps are our dear friend when it comes to holding or getting ready heavy pieces. It helps us cut and measure evenly by giving us a stable hold. But this could turn into a nightmare if something hinders it from functioning well. That is why we need to learn how to fix bar clamp. With the tips that we have given you, you can be confident enough to handle the problem on your own. Plus you can be sure it will work nicely to help you build a better workpiece. Find out more about bar clamps.