Can You Cut PVC With A Hand Saw?
Looking for that perfect equipment to cut down PVC? Or are you trying to cut PVC with your owned hand saw? Cutting PVC isn’t as easy as you may think, it requires specialized equipment to cut through it. However, if you have a hand saw in your tools, then chances are you would be wondering if can you cut PVC with a hand saw, right?
In this article, we’ll discuss if can you cut PVC with a hand saw and if there are other ways to easily cut down PVC as other best hand saw for cutting PVC pipe. You will get ideas on how to keep your life easier and more convenient. Read down below for more information.
What is PVC?
Before we start discussing the ways and other best hand saw for cutting PVC pipe, it is important first to know what a PVC is and why it needs to have specialized equipment for cutting.
A PVC or Polyvinyl chloride is a form of plastic tubing that is more commonly used for plumbing, especially for drains. These are often white or blue and usually seed in residential basements of a home. For people attempting to cut their way to a PVC pipe, you need not only sawing equipment but also the right amount of knowledge to do one.
If you plan on renovating your sink and bathroom, you are more likely to deal with various pipes. Moving a sink, shower, toilet, and all sorts require cutting a PVC pipe and relocating it in their new place. Simple cuts may require PVC know-how to deal with.
Why Do You Need to Cut the PVC Pipe?
Having to deal with a PVC pipe is quite tricky. While you may have no trouble finding the perfect pieces of PVC pipes for connections as they are available in your local hardware, the difficulty lies when cutting the pipe. That’s why people like you are eager to know if can you cut PVC with a hand saw.
Poor cutting methods tend to leave the cut ends off-square with pesky burrs that are usually bound to hinder your progress. That’s why cutting PVC pipe requires an ample amount of knowledge with regards to cutting.
More so, the good news about cutting PVC pipe is t there are plenty of methods that will allow you to cut your PVC pipe without much knowledge accurately. Usually, there are three types of equipment used, a hand saw, miter saw, and a PVC cutter.
Depending on which type you choose and the comfort levels with the tools, you might find one a better fit than the other. Whichever cutting tools you choose, we’ll provide the basic instructions to ensure that you are cutting your PVC pipe the right way!
Things You Need to Prepare Before Cutting
Almost all materials benefit from a little lubricating agent, especially during the cutting process. This helps to cut the PVC pipe with a minimal amount of pressure easily. Lubricants keep the pressure down, giving you a smoother sawing. Also, lubricants can stave off dust and other particles.
The most popular lubricant with regards to PVC pipes and cutting is the WD-40. It is one of the most popular lubricant in the planet. Choose silicone type one. These lubricants are safe for plastics and don’t melt the material. To do this, just simply spray a small amount onto the surface where you are going to cut. A quick spray is all that you need to do unless you want to deal with messier and oilier pipe cuttings.
Cutting PVC Pipe with a Hand Saw
You might be wondering if can you cut PVC with a hand saw? Definitely! Hand saw is one of the more popular choices when it comes to cutting PVC, not only Hand saw is cheap, but there is always one hand saw lying in your garage. To have a perfect cutting, using hand saw should require a guide that can be drawn on the surface before cutting, or you can use anything that will mark the pipe and guide you through the cutting process.
Always remember to go slowly and steadily. This will prevent your saw from sliding all the way through, leaving you with an uneven cutting. Also, make sure that the blade stays perfect throughout the cutting. Don’t jam the blade directly onto the pipe, or else the blade will break off. Do it with a back and forth motion until you make progress. Let the saw do the work, as they say.
Cutting PVC with the Use of a Pipe Cutter
Using PVC pipe cutter is by far one of the easiest ways to cut down PVC. In doing so, the PVC cutter is usually in the form of huge pliers. The operation is simple. Place your PVC pipe on a stable surface and line the blade on the area of cutting.
After that, squeeze the PVC cutter for the blades to meet at the center at cut right through the pipe. Remember, for it to be successful, you should put a large amount of pressure. Once the right amount of pressure is given, the PVC will break and cut immediately.
Cutting PVC with Miter Saw
One of the most appropriate and useful ways to cut PVC is with the use of a miter saw. The only drawback about miter saw is that they aren’t usually available in your toolbox and are quite expensive. But the cuts are smooth and accurate as you would like. In doing so, simply mark the area where it needs cutting.
In doing so, line up the blade where the guide is drawn and slowly drive it onto the pipe until cuts through. And then, you are done. Not only can you cut PVC with a hand saw, but with a miter saw as well.
Can you cut PVC with a hand saw alone? Definitely! Not only that, but there are can also be many on how to cut a PVC. We’ve listed the best methods that come with instructions too. Remember always to wear protective gears such as gloves and protective goggles whenever you want to cut a specific portion of a PVC
Nonetheless, these methods we’ve listed are made easier for you. You can accurately cut your PVC easily too! Be safe, and be steady!
October 14, 2020
By: Wade WIlson
Composite decking is a building material that’s gaining traction in the construction industry due to its many wonderful advantages.
October 12, 2020
By: Albert Fisk
One of the most commonly used tools in the wood working industry are small pieces of metal called plug cutters. In wood carvings and any wood carpentry shops